Gladius Lewis
Department of Mechanical Engineering
The University of Memphis
Memphis
Tennessee 38152
Name/email consistency: high
- Nucleus pulposus replacement and regeneration/repair technologies: Present status and future prospects. Lewis, G. J. Biomed. Mater. Res. Part B Appl. Biomater. (2012)
- Viscoelastic properties of injectable bone cements for orthopaedic applications: State-of-the-art review. Lewis, G. J. Biomed. Mater. Res. Part B Appl. Biomater. (2011)
- Evaluation of two novel aluminum-free, zinc-based glass polyalkenoate cements as alternatives to PMMA bone cement for use in vertebroplasty and balloon kyphoplasty. Lewis, G., Towler, M.R., Boyd, D., German, M.J., Wren, A.W., Clarkin, O.M., Yates, A. J. Mater. Sci. Mater. Med (2010)
- Dependence of in vitro fatigue properties of PMMA bone cement on the polydispersity index of its powder. Lewis, G., Li, Y. J. Mech. Behav. Biomed. Mater (2010)
- Influence of powder-to-liquid monomer ratio on properties of an injectable iodine-containing acrylic bone cement for vertebroplasty and balloon kyphoplasty. Lewis, G., Koole, L.H., van Hooy-Corstjens, C.S. J. Biomed. Mater. Res. Part B Appl. Biomater. (2009)
- Properties of antibiotic-loaded acrylic bone cements for use in cemented arthroplasties: a state-of-the-art review. Lewis, G. J. Biomed. Mater. Res. Part B Appl. Biomater. (2009)
- The use of nanoindentation for characterizing the properties of mineralized hard tissues: state-of-the art review. Lewis, G., Nyman, J.S. J. Biomed. Mater. Res. Part B Appl. Biomater. (2008)
- Thermal stability of acrylic bone cement powder under shelf storage conditions: an isothermal microcalorimetric study. Lewis, G., Son, Y. Biomed. Mater. Eng (2008)
- Alternative acrylic bone cement formulations for cemented arthroplasties: present status, key issues, and future prospects. Lewis, G. J. Biomed. Mater. Res. Part B Appl. Biomater. (2008)
- Evaluation of a synthetic vertebral body augmentation model for rapid and reliable cyclic compression life testing of materials for balloon kyphoplasty. Lewis, G., Schwardt, J.D., Slater, T.A., Janna, S. J. Biomed. Mater. Res. Part B Appl. Biomater. (2008)
- Materials, fluid dynamics, and solid mechanics aspects of coronary artery stents: a state-of-the-art review. Lewis, G. J. Biomed. Mater. Res. Part B Appl. Biomater. (2008)
- Influence of the activator in an acrylic bone cement on an array of cement properties. Lewis, G., Xu, J., Deb, S., Lasa, B.V., Román, J.S. J. Biomed. Mater. Res. A (2007)
- Rapid and reliable biomechanical screening of injectable bone cements for autonomous augmentation of osteoporotic vertebral bodies: appropriate values of elastic constants for finite element models. Lewis, G., Xu, J. J. Biomed. Mater. Res. Part B Appl. Biomater. (2007)
- Influence of two changes in the composition of an acrylic bone cement on its handling, thermal, physical, and mechanical properties. Lewis, G., Xu, J., Madigan, S., Towler, M.R. J. Mater. Sci. Mater. Med (2007)
- Evaluation of an accelerated aging medium for acrylic bone cement based on analysis of nanoindentation measurements on laboratory-prepared and retrieved specimens. Lewis, G., Xu, J., Dunne, N., Daly, C., Orr, J. J. Biomed. Mater. Res. Part B Appl. Biomater. (2007)
- Percutaneous vertebroplasty and kyphoplasty for the stand-alone augmentation of osteoporosis-induced vertebral compression fractures: present status and future directions. Lewis, G. J. Biomed. Mater. Res. Part B Appl. Biomater. (2007)
- Influence of changes in the composition of an acrylic bone cement on its polymerization kinetics. Lewis, G., Mishra, S.R. J. Biomed. Mater. Res. Part B Appl. Biomater. (2007)
- One equivalent electrical circuit is applicable to model the interface between the passive surface layer on an orthopaedic alloy and a biosimulating aqueous solution. Lewis, G., Vejerla, R., Mishra, S. Biomed. Mater. Eng (2007)
- Influence of a pre-blended antibiotic (gentamicin sulfate powder) on various mechanical, thermal, and physical properties of three acrylic bone cements. Lewis, G., Bhattaram, A. J. Biomater. Appl (2006)
- Alendronate in bone cement: fatigue life degraded by liquid, not by powder. Lewis, G., Janna, S. Clin. Orthop. Relat. Res. (2006)
- Critical comparison of two methods for the determination of nanomechanical properties of a material: application to synthetic and natural biomaterials. Lewis, G., Xu, J., Dunne, N., Daly, C., Orr, J. J. Biomed. Mater. Res. Part B Appl. Biomater. (2006)
- Estimation of the optimum loading of an antibiotic powder in an acrylic bone cement: gentamicin sulfate in SmartSet HV. Lewis, G., Janna, S. Acta. Orthop (2006)
- Finite element analysis of a three-dimensional model of a proximal femur-cemented femoral THJR component construct: influence of assigned interface conditions on strain energy density. Lewis, G., Duggineni, R. Biomed. Mater. Eng (2006)
- Influence of the method of blending an antibiotic powder with an acrylic bone cement powder on physical, mechanical, and thermal properties of the cured cement. Lewis, G., Janna, S., Bhattaram, A. Biomaterials (2005)
- Influence of the radiopacifier in an acrylic bone cement on its mechanical, thermal, and physical properties: barium sulfate-containing cement versus iodine-containing cement. Lewis, G., van Hooy-Corstjens, C.S., Bhattaram, A., Koole, L.H. J. Biomed. Mater. Res. Part B Appl. Biomater. (2005)
- Effect of fabrication pressure on the fatigue performance of Cemex XL acrylic bone cement. Lewis, G., Janna, S.I. Biomaterials (2004)
- The influence of the viscosity classification of an acrylic bone cement on its in vitro fatigue performance. Lewis, G., Janna, S. Biomed. Mater. Eng (2004)
- Geometric element analysis of fretting in a model of a modular femoral component of a hip implant. Lewis, G. Biomed. Mater. Eng (2004)
- Estimation of the minimum number of test specimens for fatigue testing of acrylic bone cement. Lewis, G., Sadhasivini, A. Biomaterials (2004)
- Biomechanics of and research challenges in uncemented total ankle replacement. Lewis, G. Clin. Orthop. Relat. Res. (2004)
- The in vitro elution of gentamicin sulfate from a commercially available gentamicin-loaded acrylic bone cement, VersaBond AB. Lewis, G., Janna, S. J. Biomed. Mater. Res. Part B Appl. Biomater. (2004)
- Effect of test frequency on the in vitro fatigue life of acrylic bone cement. Lewis, G., Janna, S., Carroll, M. Biomaterials (2003)
- The relative influence of five variables on the in vitro wear rate of uncrosslinked UHMWPE acetabular cup liners. Lewis, G., Fencl, R.M., Carroll, M., Collins, T. Biomaterials (2003)
- Fatigue testing and performance of acrylic bone-cement materials: state-of-the-art review. Lewis, G. J. Biomed. Mater. Res. Part B Appl. Biomater. (2003)
- Effect of test specimen cross-sectional shape on the in vitro fatigue life of acrylic bone cement. Lewis, G., Janna, S. Biomaterials (2003)
- Use of isothermal heat-conduction microcalorimetry (IHCMC) for the evaluation of synthetic biomaterials. Lewis, G., Daniels, A.U. J. Biomed. Mater. Res. Part B Appl. Biomater. (2003)
- Rheological properties of acrylic bone cement during curing and the role of the size of the powder particles. Lewis, G., Carroll, M. J. Biomed. Mater. Res. (2002)
- Key issues involved with the use of miniature specimens in the characterization of the mechanical behavior of polymeric biomaterials--a review. Lewis, G. J. Biomed. Mater. Res. (2002)
- Properties of crosslinked ultra-high-molecular-weight polyethylene. Lewis, G. Biomaterials (2001)
- Relative roles of cement molecular weight and mixing method on the fatigue performance of acrylic bone cement: Simplex P versus Osteopal. Lewis, G. J. Biomed. Mater. Res. (2000)
- Design issues in clinical studies of the in vivo volumetric wear rate of polyethylene bearing components. Lewis, G. J. Bone. Joint. Surg. Am (2000)
- Correlation between impact strength and fracture toughness of PMMA-based bone cements. Lewis, G., Mladsi, S. Biomaterials (2000)
- Toward standardization of methods of determination of fracture properties of acrylic bone cement and statistical analysis of test results. Lewis, G., Nyman, J.S. J. Biomed. Mater. Res. (2000)
- Effect of sterilization method on properties of Palacos R acrylic bone cement. Lewis, G., Mladsi, S. Biomaterials (1998)
