Viscoelastic behavior of polyurethane vascular prostheses.
A method of evaluating the in vitro viscoelastic properties of microfibrous Biomer poly(ether-urethane-urea) vascular prostheses is outlined. Quasi-static and dynamic tests were carried out on Biomer grafts of diameter between 3.4 mm and 3.8 mm and wall thickness between 0.25 mm and 0.55 mm. It is shown that the quasi-static compliance of a Biomer graft may be determined from an equation relating transmural pressure, radius, and longitudinal strains in terms of the graft dimensions and material constants. The dynamic compliance spectra were evaluated as a function of the longitudinal and circumferential strains and temperature. Although the ratio of dynamic compliance to quasi-static compliance was linearly related to the logarithm of frequency it was not significantly affected by strains or temperature over the relevant ranges studied. Employing the usual assumptions of linear isotropic incremental elastic theory the dynamic elastic and viscous moduli were calculated as a function of frequency. Biomer grafts were more viscous than canine carotid and femoral arteries, especially at the higher frequencies. The variation in the ratio of dynamic to static incremental modulus with frequency was similar to that observed in the femoral arteries by Bergel (J. Physiol., 156, 458-469 (1961)).[1]References
- Viscoelastic behavior of polyurethane vascular prostheses. How, T.V., Annis, D. J. Biomed. Mater. Res. (1987) [Pubmed]
Annotations and hyperlinks in this abstract are from individual authors of WikiGenes or automatically generated by the WikiGenes Data Mining Engine. The abstract is from MEDLINE®/PubMed®, a database of the U.S. National Library of Medicine.About WikiGenesOpen Access LicencePrivacy PolicyTerms of Useapsburg
